top of page

Re-shingle Your House with Confidence: A Step-by-Step Guide


Roof Repair Richmond Hill

If you are looking for ways of giving a new look to your roof, or simply need a reliable and efficient solution for roof repair, shingle replacement might just be what you have been looking for. In this blog, we are sharing a step-by-step guide on how to re-shingle your roof so that you can keep your home stylish and properly protected. Let’s dive into it.


Can I Replace Roof Shingles?

 

The short answer is yes! Even though shingles are generally made to last for long periods of time, extreme weather conditions such as strong winds, heavy snow and intense heat can lead to cracks on your shingles. Fortunately, asphalt shingles can be replaced by either you or professionals. This can greatly reduce the risks of moisture damage associated with water infiltration on your roof.

 

The Re-shingling Process:

 

Step 1: Gather Material

 

Before starting the process of re-shingling your roof, make sure you have the materials necessary for the job. You will need to have all the shingles with you once you get on your roof, a pointing trowel, as well as a “not -too-large” crowbar.

 

Step 2: Inspect Your Roof

 

The first thing you will have to do to re-shingle your roof is to properly inspect it. Make sure you have a clear idea of which shingles are going to be replaced. Look for signs of damage and cracks that can give room for rainwater to infiltrate.

 

Step 3: Scrap Adjacent Seals

 

After identifying the shingles that need to be replaced, you can scrap the seal of the adjacent shingles. This is done to make it easier for you to access and remove the nails of the shingle you want to replace.

 

Step 4: Remove the Nails and the Damaged Shingle

 

Once you have loosened up the adjacent shingles, you can start removing the nails from the ones that are going to be replaced. This can be done using a crowbar that is small enough to go in between the shingles. In most cases, there will be four to six nails to be taken off. Remove them and slide off the damaged shingle gently.

 

Step 5: Install the New Shingle

 

Insert the new shingle into position and use the nails you removed to keep it in place. It is fundamental that the shingle you are installing has the same shape and size as the one you removed. Even though small differences might not be noticeable when compared individually, they can lead to bigger discrepancies if many shingles are being replaced.

 

Can I Re-shingle Over Existing Shingles?

 

Yes, under the right conditions, you can install new shingles over the existing ones on your roof. However, it is recommended that you check the local building codes and bylaws of your region before doing so. Because of fire safety reasons, it is usually recommended that you don’t exceed two layers of asphalt shingles on your roof. Additionally, you want to make sure every new shingle has the exact same proportions as the old ones to avoid ending up with a lumpy roof at the end of the process.

 

Your Choice for Roof Repair in Richmond Hill

 

Looking for roof repair Richmond Hill services? Trudel & Sons Roofing Ltd has got you covered. Whether you need assistance to get new shingles installed or a full replacement of your roof, our experienced team can provide the ideal solution for your house. Don’t hesitate to give us a call, and let us help you keep your roof in optimal condition.


bottom of page